Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
To replace the ignition coil (or coil pack) of the car we need to open the front hood and, if necessary, remove the engine cover in order to identify its components. We identify the ignition coil located near the spark plugs and disconnect it from the high voltage cables. We also disconnect the electrical connector and then unscrew all the fastening elements of the coil and remove it from its seat. We insert the new coil and go to reposition all the fasteners, the connector cable and the high voltage cables. Finally, we close the engine compartment.
Posted on 11 May 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.066
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |