Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Car Headlight

Model: (Various brands) Various
Part: Headlight

In this video, you will learn how to replace the front headlight of a car, in this case, a Toyota Aygo. As the first step, with the vehicle off, unscrew the bolts that hold the plastic mask of the car, allowing you to remove it. Once the front is removed, you will have full access to the headlight; then disconnect all connectors to remove the headlight from the car. Now you can replace it with a new one or, if applicable, just replace the bulb by unscrewing the retaining screws. Once replaced, reconnect the connectors, reattach the front of the car, and tighten the previously removed bolts, ensuring the mask is properly fitted.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb
Replacing the Front Headlamp Bulb
(Various brands) Various How to replace the front headlamp bulbs of your car? Follow these steps to change the bulbs. Lift the cover of the engine compartment and secure it. …
Replacing the Front Position Light on the Yaris
Replacing the Front Position Light on the Yaris
(Various brands) Various Want to replace the front bulbs on the Toyota Yaris? Here’s how to replace the front headlight bulbs. Lift the engine cover bonnet and secure it. Loc…
How to clean the inside of a headlamp
How to clean the inside of a headlamp
(Various brands) Various In this video tutorial, you can see how to clean the inside of a headlamp. Once you have removed the headlamp from your vehicle, take out the bulb to…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos