Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the time on a Kymco Xciting 300

Model: (Various brands) Various
Part: Clock

If you need to change the time set on the dashboard of your motorcycle, you will find the necessary instructions and steps in the description below, and you can also check the images in the video. After turning on the ignition, ensure that the total mileage is visible on the display. Then, press and hold the Mode button and the ADJ button simultaneously; the hour field will start to flash, and you can adjust it using the left and right buttons. Finally, you can proceed in the same manner to adjust the minutes. Wait a few seconds, and the time indication will stop flashing and be saved.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plug of the Kymco Xciting S400
(Various brands) Various Although replacing the spark plug of the Kymco Xciting S400 may seem like a lengthy task to do on your own, the process, while laborious, is very sat…
How to Set the Clock on the Kymco 300
How to Set the Clock on the Kymco 300
(Various brands) Various If you need to change the time on this scooter model, you will find simple instructions on how to proceed in the tutorial video and in the descriptio…
How to change the display from Celsius to Fahrenheit on a Kymco scooter
How to change the display from Celsius to Fahrenheit on a Kymco scooter
(Various brands) Various In this video, you will see how to easily switch between degrees Celsius and degrees Fahrenheit on a Kymco scooter: on the multifunction display, amo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos