Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Kymco 300

Model: (Various brands) Various
Part: Clock

If you need to change the time on this scooter model, you will find simple instructions on how to proceed in the tutorial video and in the description below. The first step is to turn on the ignition and locate the two buttons below the instrument cluster on the right and left. Press and hold them simultaneously for 3 seconds until the time display starts to flash. Then, use the right button to adjust the minutes and the left button to adjust the hours. Once the correct time is set, press both buttons simultaneously again to save it.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock on the Vespa Gts 300
How to adjust the clock on the Vespa Gts 300
(Various brands) Various To adjust the clock on the scooter, follow these simple steps: insert the key and turn on the ignition. At the bottom of the dashboard, you will see …
How to set the clock on the Pioneer Mosfet 50wx4 radio
How to set the clock on the Pioneer Mosfet 50wx4 radio
(Various brands) Various During the time change, it is possible that the clock on our car radio does not automatically change along with the instrument panel clock. Therefore…
How to Set the Clock on Beverly 300 Scooter
How to Set the Clock on Beverly 300 Scooter
(Various brands) Various In this video tutorial, you can see how to set the clock on the Beverly 300 scooter. For safety reasons, the clock can only be set when the vehicle i…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos