Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Windscreen on the SH300 Motorcycle

Model: (Various brands) Various

This video shows you how to install the windscreen on the SH300 motorcycle. Start by taking a 13mm spanner and removing the two rear-view mirrors. Next, slide the two plastic caps onto the two pins and secure the two brackets for the windscreen installation. Refit the mirrors onto their respective pins and begin securing the windscreen starting from the two lower holes facing the rider. As shown in the video, use two long spacers to screw in the fixing bolts. At this point, also secure the two upper brackets to the supports where the mirrors are bolted. Finally, insert and tighten the two lower pins located under the handlebars facing outwards.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Fit a Fabbri Windscreen on an Aprilia
(Various brands) Various If you intend to fit a windscreen on your scooter yourself, follow the instructions below and refer to the video. Identify the various components of …
How to remove the telepass holder from the windshield
How to remove the telepass holder from the windshield
(Various brands) Various Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simpl…
How to Fit an Isotta Windscreen on a Kymco?
How to Fit an Isotta Windscreen on a Kymco?
(Various brands) Various If you need to fit a winter windscreen on a Kymco scooter, you will find the necessary instructions for the installation in the video and in the desc…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos