Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The correct tyre pressure greatly influences vehicle handling

Model: (Various brands) Various
Part: Checks and maintenance

The correct tyre pressure significantly affects vehicle handling, as incorrect pressure can increase braking distances and cause tyre damage. It is also important to note that incorrect pressure increases fuel consumption due to higher rolling resistance; however, tyre pressure should not be excessive either. The correct pressure is indicated on the label found on the driver's door frame. In winter, it is advisable to add 0.2 bar to compensate for very cold temperatures. The pressure, which can be checked at any service station, should be checked when the tyres are cold.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How tire pressure affects fuel consumption and tire wear.
How tire pressure affects fuel consumption and tire wear.
(Various brands) Various The video introduces us to a very important topic: how tire pressure affects fuel consumption and the tire itself. Low pressure increases rolling res…
The correct tyre pressure for my car
The correct tyre pressure for my car
(Various brands) Various There cannot be a specific pressure, only a correct range. The compressed air put into the tyres is sensitive to ambient temperature, meaning it will…
How to Inflate Car Tyres?
(Various brands) Various Adjusting tyre pressure is a task that can be done independently at any petrol station. The important thing is to carefully follow the instructions i…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos