Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Touch Up the Bodywork of a Car with a Brush

Model: (Various brands) Various
Part: Body

Video tutorial

In this video, you will learn how to perform a brush touch-up on your car in the best possible way. If you want to use the brand recommended by our YouTuber, you can check the website espertidellavernice. First, clean the area to be treated thoroughly.

Shake well to mix the colour, and with a fine brush, apply the colour only inside the scratch. This job requires patience and attention; make two or three passes.

Allow it to dry well, then use wet 2000 grit paper, and now apply the clear coat with the usual clean brush. One coat is sufficient.

Allow it to dry thoroughly. Lightly go over with water and 2000 grit paper, just to clean.

Now apply a slightly abrasive polish, spreading it with a microfibre cloth. It will now be barely noticeable.


Updated on 23 July 2026 by ScegliAuto


Related tutorials

How to Clean Your Car Speakers
How to Clean Your Car Speakers
(Various brands) Various Often when cleaning the car, we forget to clean the speakers, perhaps thinking that wiping the panel with a damp cloth is sufficient. In reality, thi…
A Way to Remove Rust from the Bodywork
A Way to Remove Rust from the Bodywork
(Various brands) Various If the bodywork of your vehicle has suffered a small impact that has removed the paint layer, this will expose the metal sheet to rust. If you do not…
How to Touch Up the Bodywork with Spray Paint.
How to Touch Up the Bodywork with Spray Paint.
(Various brands) Various You will need some sheets of newspaper, a bit of masking tape, and a spray can of the same colour as your bodywork: Use medium-fine sandpaper to remo…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos