Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Touch Up the Bodywork with Spray Paint.

Model: (Various brands) Various
Part: Body

Video tutorial

You will need some sheets of newspaper, a bit of masking tape, and a spray can of the same colour as your bodywork: Use medium-fine sandpaper to remove any protrusions only from the area you will be repainting. With much finer grit, smooth the area around the paint, and mask off the parts you do not want to paint, including the wheel, bonnet, and headlamp.

Start with a very light coat, wait five minutes, and then apply a second coat, trying to make the colour as uniform as possible. Wait for it to dry. If necessary, apply a third coat.

Then polish with wax, starting from the peripheral areas: this helps blend the new paint. Dry thoroughly.

Remove the masking. If the result is not satisfactory, you can easily remove the spray paint with a nitro solvent while it is still fresh.

In the case of metallic paint, it is necessary to spray a clear coat as well, otherwise, it will remain dull.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Touch Up the Bodywork of a Car with a Brush
How to Touch Up the Bodywork of a Car with a Brush
(Various brands) Various In this video, you will learn how to perform a brush touch-up on your car in the best possible way. If you want to use the brand recommended by our Y…
How to Remove Scratches from Plastic Surfaces of Your Car
How to Remove Scratches from Plastic Surfaces of Your Car
(Various brands) Various Sometimes, the plastic parts of your vehicle may get scratched. Scratches are unsightly and can be costly to remove; this guide aims to show you how …
How to remove logos, emblems, and lettering from your car
(Various brands) Various Taking care of your vehicle's aesthetics means not only repairing the bodywork if damaged but also dealing with the badges, logos, and various sticke…

    Frequently Asked Questions

    • Vari - How much does it cost to repaint the bonnet and roof? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos