Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant in a scooter.

Model: (Various brands) Various
Part: Antifreeze coolant

In this video tutorial, you can see how to replace the coolant in a scooter. First, open the cap of the coolant reservoir; now loosen the hose clamp and remove the hose to let all the coolant drain out. Use an air compressor to blow out any remaining liquid. Use a suitable product if there is dirt in the system. At this point, reattach the hose and replace the clamp previously removed. Now fill the system with coolant (antifreeze). Next, locate the bleed valve, which is usually at the top of the cylinder. Once the valve is opened, let the liquid flow out until no more air bubbles are visible.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Radiator Fluid on a Yamaha Xmax
How to Top Up the Radiator Fluid on a Yamaha Xmax
(Various brands) Various To check the coolant level and top it up on your scooter, follow the instructions in this description and also check the images in the video. First, …
Coolant Replacement
Coolant Replacement
(Various brands) Various Open the bonnet and prop it up with the support rod. Place a collection tray under the engine bay. Once you locate the coolant pipe, check if it has …
How to Replace the Radiator Fluid on the Yamaha X Max
How to Replace the Radiator Fluid on the Yamaha X Max
(Various brands) Various If you need to top up the coolant on your scooter, you can find instructions on how to proceed in the description below and in the video. First, use …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos