Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator Fluid on the Yamaha X Max

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

If you need to top up the coolant on your scooter, you can find instructions on how to proceed in the description below and in the video. First, use the key provided to open the flap located under the handlebars and unscrew the screw at the top. Then, remove the upper plastic panel, and underneath, you will find the filling cap for the coolant reservoir.

At the bottom of the compartment, there is also a coolant level indicator, so you can restore the required level by adding the necessary fluid.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on the Yamaha X Max 300
How to Reset the Oil Warning Light on the Yamaha X Max 300
(Various brands) Various To reset the oil warning light on the Yamaha X Max 300, follow these steps: Turn off the ignition of the X Max, press and hold the mode and set butto…
How to Change the Short and Long Bulbs on a Yamaha X Max 125
How to Change the Short and Long Bulbs on a Yamaha X Max 125
(Various brands) Various To change the bulb on a Yamaha X Max 125, as shown in the video, you will need a 4 mm spanner, a 10 mm spanner, a Phillips screwdriver, and of course…
Where to Find the Fuse Box on the Yamaha X Max 300
Where to Find the Fuse Box on the Yamaha X Max 300
(Various brands) Various If you are looking for the fuse box located inside your Yamaha X Max 300 but have not yet found it, just carefully read the following mini guide and …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos