Do it yourself
Frequently asked questions about cars and motorcycles

How to Install a Shark Fin Antenna

Model: (Various brands) Various
Part: Antenna

In this simple and brief video tutorial today, see the procedure necessary to install a shark fin antenna on your vehicle; this operation is valid for all vehicles with an antenna on the roof. First, remove the old antenna from the vehicle, then degrease and clean the surface of the roof where you will install the new antenna. Once done, connect the adapter cable of the new antenna to its base as shown in the video, and finally, use adhesive film to install the shark fin antenna in place of the old one.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various To replace the car antenna with a shark fin antenna, first unscrew the old antenna from your vehicle. Clean the bodywork around the base of the old a…
(Various brands) Various Shark fin antennas are very popular among those who want to give their car a sportier look and prefer them over the classic whip antenna. If you are …
(Various brands) Various .. In this video, we will see how to install a shark fin antenna on a car that had a regular antenna with a mast. Let's start by unscrewing.. …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos