Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How Does an Eccentric Extractor for Stuck Screws Work?

Model: (Various brands) Various

The eccentric extractor for stuck screws features a serrated eccentric wheel that grips the protruding screw and allows for extraction. Additionally, the double hole expands the tool's usability. This type of tool is used on all those "impossible" screws to extract due to their size and position. It is often used in workshops or by DIY enthusiasts working on their cars. If you want to start a DIY journey on your vehicle, consider purchasing one as you never know when it will come in handy. Its cost is €56.00.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How Does an Internal Bearing Puller Work?
How Does an Internal Bearing Puller Work?
(Various brands) Various A car bearing puller is a tool designed to facilitate the removal of a vehicle's bearing. But how do you use it? Simply insert it into the bearing an…
How to Remove the Air Conditioning Condenser
How to Remove the Air Conditioning Condenser
(Various brands) Various Is the condenser in your car damaged? Follow these steps to remove the air conditioning condenser from the engine bay. Lift the front bonnet of the c…
Disassembly of a Starter Motor
Disassembly of a Starter Motor
(Various brands) Various The first step when disassembling a starter motor is to remove the two long fixing screws located on the sides, then unscrew the 13 mm bolt a little …

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos