Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open and Replace the Battery in a Nice Remote Control

Model: (Various brands) Various
Part: Key

This video shows how to open and replace the battery in a Nice remote control: opening it is very simple. There is a small hole under the casing, which is used to open it. Use a sharp object, such as a small screwdriver or a regular ballpoint pen, and push inward. The cover will open, allowing access to the battery compartment. Using the sharp object, pry out the battery from its holder. It is a common CR2032 battery that can be found at any supermarket or local newsagent for a few pounds. Replace it, ensuring the correct polarity and not pushing it too deep, as it will not be in the correct position and no light will illuminate on the remote. This way, the range of the remote will be truly impressive.

Updated on 3 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Nice Flor-s 2 key
How to replace the battery of the Nice Flor-s 2 key
(Various brands) Various Today we will explain how to replace the battery of the Nice Flor-s model 2 car remote control. To replace the key battery on your own, you need to o…
How to replace the battery of the Nice Inti2 remote control
How to replace the battery of the Nice Inti2 remote control
(Various brands) Various In this video, we will see how to change the battery of the Nice Inti2 remote control, which is a device that allows you to remotely control the open…
How to program the Nice remote control
How to program the Nice remote control
(Various brands) Various Today we will explain how to program a gate remote control. To program a new Nice remote control, you need to use the "old" remote control. To carry …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos