Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Nice Ergo?

Model: (Various brands) Various
Part: Key

The Nice Ergo is a remote control to be used for various purposes, air conditioners and more. It is obviously equipped with batteries that allow its operation, but over time these run out and need to be replaced. The video here shows us how to do it, specifying that this method is used for all remotes of the same brand: with a small screwdriver you press, inserting it into the appropriate hole in the back of the aforementioned remote control, removing the cover. By doing so we will be able to access the battery compartment, remove the old one and insert the replacement.

Posted on 10 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Copy Remote Controls for Nice Automatic Gates
How to Copy Remote Controls for Nice Automatic Gates
(Various brands) Various To copy a Nice remote control, tilt the original remote towards the receiver during the procedure. This requires a precise angle that allows the sign…
How to Replace the Battery in a Nice Remote Control
How to Replace the Battery in a Nice Remote Control
(Various brands) Various Replacing the battery in a Nice remote control is very simple. All you need is a pen and the correct model of the new battery. Take the remote contro…
How to change the battery in the Nice transmitter remote control
How to change the battery in the Nice transmitter remote control
(Various brands) Various To replace the battery in the Nice transmitter remote control, take a small flathead screwdriver, insert it into the top of the remote, and lever off…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos