Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fix Water Stagnation in the Door

Model: (Various brands) Various
Part: Body

In this video, learn how to resolve the issue that can occur in older cars, particularly if the door seals are worn. During heavy rain, water may remain in the door. Doors are designed so that if water enters, it drains quickly through drainage holes specifically made for this purpose; however, if these holes become blocked (with dirt, sand, or leaves), water remains inside the door, leading to an unpleasant musty smell inside the vehicle. If you open the door and check under the lower seal, you may find the holes blocked with dirt; use a screwdriver to help release a lot of water.

Updated on 12 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to solve the problem of the car door that doesn't close.
How to solve the problem of the car door that doesn't close.
(Various brands) Various In this video we can see how to solve the problem of the car door that suddenly refuses to close: what often happens is that the door latch has gone …
How to Solve the Condensation Problem Inside the Car Headlight
How to Solve the Condensation Problem Inside the Car Headlight
(Various brands) Various In this video tutorial, you can see how to solve the condensation problem inside your car's headlight. When this problem occurs, the likely cause is …
How to solve the problem of the car alarm randomly going off
How to solve the problem of the car alarm randomly going off
(Various brands) Various In this video we can see how to easily solve the problem of the car alarm going off randomly. It is a very annoying problem because it can go off at …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos