Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In this video tutorial, we can see how it is possible to replace the handlebars on a Tmax scooter. The necessary materials for this job are: an 18mm Allen key, a glass cleaner spray, a cloth, and a degreaser. The new handlebars come in two different sizes, one for the gas part and the other for the left side. Take the 18mm Allen key and unscrew the balance weight of the handlebar; once the balance weight is removed, it is sufficient to pull with a bit of force to remove the handlebar; use the degreaser spray to clean the seat of the handlebar. To put the handlebar back on, we must wet it with the glass cleaner spray, but you can also use alcohol or water and soap (also pass it inside the handlebar). Insert the new handlebar and place the label where you prefer. Screw the balance weight back into place.
Posted on 29 August 2023 by ScegliAuto
How to change the sticky handlebars of a scooter.
(Various brands) Various In this video we see how to change the sticky handles of our scooter: there is nothing more unpleasant than driving with handles that have been baked
How to remove the windshield of the Tmax 500 scooter.
(Various brands) Various Removing the windshield of the T-Max 500 Scooter has never been easier thanks to our video tutorial that will show you how to perform this simple ope
How to replace the rear bulb of the Tmax 500?
(Various brands) Various To replace the bulb in the rear light of the scooter, proceed as follows: first open and tip over the saddle and remove the fixing screws from the in Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.108
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |