Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the wheel speed sensor

Model: (Various brands) Various
Part: Wheel

Video tutorial

Wheel speed sensors are part of the vehicle's ABS (Anti-lock Braking System), which distributes braking force to each wheel. These sensors are installed near the wheel's rotation axes and are responsible for reading rotation speed data and sending it to the control module of the system.

If one of the systems is faulty, the system switches to emergency mode. If a malfunction occurs, it is important to replace the sensor immediately.

To replace the sensor, clean the connector and then disconnect it; the sensor may be attached to the bodywork or be a one-piece unit. Next, unscrew the ABS sensor's fastening elements and remove the sensor from its mounting location.

After that, clean the sensor's mounting area and install the new sensor. Finally, reconnect the sensor to the connector.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

(Various brands) Various The ABS speed sensor is located near the wheel hub, in front of a toothed ring called the tone ring. Before checking the speed sensor, ensure that th…
(Various brands) Various In this interesting video, you can see the method to test the ABS wheel speed sensor: take the sensor, disconnect the connector that goes to the sens…
(Various brands) Various If you drive too fast or steer too sharply, lateral forces can make the vehicle unstable. ESP intervenes on these forces. ESP consists of: a wheel sp…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Remove the Spare Wheel from the Citroen C4 Picasso

Follow these instructions to remove the spare wheel and replace it on the Citroen C4 Picasso. On this model, the spare wheel is located under the vehicle's floor; to lower it, simply unscrew the bolt to loosen the strap, then disconnect it from the spare wheel, as shown in the video. At this point, lift the vehicle and remove the wheel, securing the spare wheel or space-saver; tighten the bolts in a criss-cross pattern, finally placing the old wheel back under the vehicle's floor!

Watch the video!


by ScegliAuto

More videos