Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to test an ABS wheel sensor

Model: (Various brands) Various
Part: Checks and maintenance

In this very interesting video, we can see the method for testing the ABS wheel speed sensor: we need to take the sensor, disconnect the connector that goes to the sensor itself, and insert two poles inside the plug - which is divided into two halves - one positive and one negative, through which we will pass the alternating current. Now we turn the wheel hub, and we see that the voltmeter simultaneously detects values, this means that the sensor is working correctly, because this is exactly how the sensor does its job, creating tension when the wheel rotates. This is the method for testing the sensor.

Posted on 30 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Check the ABS Wheel Speed Sensor
How to Check the ABS Wheel Speed Sensor
(Various brands) Various The ABS speed sensor is located near the wheel hub, in front of a toothed ring called the tone ring. Before checking the speed sensor, ensure that th…
How do you check an ABS sensor
How do you check an ABS sensor
(Various brands) Various In this video we can see one of the systems for testing ABS sensors: using a multimeter we measure the resistance, connecting the probes to the two s…
How a dirty wheel speed sensor can trigger the ABS warning light.
How a dirty wheel speed sensor can trigger the ABS warning light.
(Various brands) Various In this video, we can see how the speed sensor of a wheel, if dirty, can affect the activation of the ABS warning light on our vehicle. In fact, thes…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos