Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you check an ABS sensor

Model: (Various brands) Various
Part: Checks and maintenance

In this video we can see one of the systems for testing ABS sensors: using a multimeter we measure the resistance, connecting the probes to the two sensor pins. The expected values are between 1,000 and 2500 Ohms. If the resistance is infinite (open circuit) or zero (short circuit), the sensor needs to be replaced; if it is significantly different from the other sensors, it is still a sign of malfunction. We measure the AC voltage, setting the multimeter to AC Volts, on the lowest scale; reconnect the sensor and connect the probes to its terminals, then manually rotate the wheel: the multimeter should measure a small alternating voltage (0.1-2.0 V); the faster it spins, the higher the voltage rises: if it does not generate voltage then it means it is faulty.

Posted on 31 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Check the ABS Wheel Speed Sensor
How to Check the ABS Wheel Speed Sensor
(Various brands) Various The ABS speed sensor is located near the wheel hub, in front of a toothed ring called the tone ring. Before checking the speed sensor, ensure that th…
How to test an ABS wheel sensor
How to test an ABS wheel sensor
(Various brands) Various In this very interesting video, we can see the method for testing the ABS wheel speed sensor: we need to take the sensor, disconnect the connector th…
How to replace the wheel speed sensor
How to replace the wheel speed sensor
(Various brands) Various Wheel speed sensors are part of the vehicle's ABS (Anti-lock Braking System), which distributes braking force to each wheel. These sensors are instal…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos