Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Hummer H3

Model: (Various brands) Various
Part: Service warning light

Video tutorial

If you own a Hummer H3 and want to learn how to manually reset the oil light, read this guide carefully and put the instructions into practice. First, enter the vehicle and turn the key to position 2 to start the dashboard in diagnostic mode.

Then, press the button located below the speedometer multiple times until you see the "Oil life" message. At this point, hold down the same button used earlier until the oil light turns off completely.


Updated on 24 August 2026 by ScegliAuto


Related tutorials

Where to Find the Fuse Box of the Hummer H2
Where to Find the Fuse Box of the Hummer H2
(Various brands) Various To easily locate the fuse box of your Hummer H2, carefully follow the instructions below. Before you start, ensure the vehicle is completely off and …
Position and Diagram of the Fuse Box in the Hummer H3
(Various brands) Various In this video, we see the layout of the fuse boxes and the corresponding diagram for the Hummer H3: this model has a single fuse box located inside t…
How to Reset the Oil Light on the Yamaha Xmax
(Various brands) Various Whenever you change the engine oil on this type of motorcycle, you must also reset the service light that appears on the dashboard. The description b…

    Frequently Asked Questions

    • Vari - How do you reset the Sym Fiddle's oil warning light? Read answer
    • Vari - How do you reset the Service light on an Aixam? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos