Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What are the reference parameters for tyre inflation pressure

Model: (Various brands) Various
Part: Wheel

In this video, find out where to look for the parameters to reference for the correct tyre inflation pressure of your vehicle. You can find this information in the owner's manual of your vehicle or on the driver's door sill, on the metal plate that also indicates the full chassis number (but remember that this is not the legal chassis number). The European unit of measurement is "bar" and it indicates various pressures for full load and normal load. At the bottom, the pressure for the spare wheel is indicated. Remember that tyres should be inflated when cold. If the outside temperature is very high, inflate the tyre by an additional 0.3 bar due to the expansion of the rubber.

Updated on 5 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

What is the correct pressure for winter tires?
What is the correct pressure for winter tires?
(Various brands) Various In this video we see what the correct pressure for winter tires is. In fact, the variable weather conditions can also vary the tire pressure, so it i…
What Does the Tyre Pressure Warning Light Indicate?
What Does the Tyre Pressure Warning Light Indicate?
(Various brands) Various The tyre pressure warning light illuminates on the vehicle display when the tyre pressure is below the level required by the manufacturer. The first …
What does the TPMS light indicate on a vehicle?
What does the TPMS light indicate on a vehicle?
(Various brands) Various The TPMS warning light is used to indicate that the tire pressure of a vehicle needs to be adjusted. When the light comes on, it means that the senso…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos