Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Paint Wheel Bolts?

Model: (Various brands) Various
Part: Checks and maintenance

After thoroughly cleaning your vehicle, you may have noticed that the wheel bolts are worn and unpainted, and you want to paint them without removing them? We will reveal a trick to paint the bolts practically and quickly without removing them from their place. Take a long, thin plastic bottle and cut it in half. Then, take a spray can of your preferred colour and place it inside the bottle. Aim towards the bolts and start spraying, using the bottle as protection. Once finished with the small bolts, you can move on to the larger ones, perhaps using a wider neck bottle.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Paint Wheel Bolts
How to Paint Wheel Bolts
(Various brands) Various Painting wheel bolts is very simple thanks to the trick we will explain today. With the help of this short video tutorial, you will learn how to carr…
How to Paint a GasGas Motorcycle
How to Paint a GasGas Motorcycle
(Various brands) Various In today's video, you will see how to repaint a GasGas Tx motorcycle. First, proceed to dismantle the components of the motorcycle. You will need to …
How to Remove Rust and Paint a Wheel Rim?
How to Remove Rust and Paint a Wheel Rim?
(Various brands) Various If you want a refined and clean appearance for your car, you must also take care of the wheel rims as they can be damaged by water, impacts, and wear…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos