Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
Removing the seal of the entrance door of a camper is a very simple operation that can be done independently. To remove the seal, first park the camper on a flat surface and open the door, securing it in place. Begin the removal by inserting a flathead screwdriver or a plastic lever into the seal and carefully sliding it out without damaging the door. Once the seal is removed, use a scraper to remove any remaining adhesive residue. After removing the residue, proceed to install the new seal.
Posted on 9 February 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.058
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |