Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cigarette lighter fuse of the MAN TG X?

Model: (Various brands) Various
Part: Fuse box

Video tutorial

The MAN TG X places the fuse for the cigarette lighter socket inside the cabin. The fuse box is indeed located inside the cabin, specifically behind the passenger side glove compartment.

Inside, the cover displays the fuse diagram with names and amperage. The cigarette lighter fuse is labelled F158 and rated at 10 Amperes.

To replace it, open the fuse box and use pliers for removal. Then, insert a new fuse with the same amperage; using an incorrect amperage could cause issues with the control unit.


Updated on 14 September 2026 by ScegliAuto


Related tutorials

(Various brands) Various When the cigarette lighter socket in the 2008 Man TGX truck stops working, it usually indicates a blown fuse. In such cases, replacement is necessary…
(Various brands) Various MAN TGX vehicles have a fuse box inside. The fuse box is located within the cabin, specifically behind the passenger side dashboard. To access it, yo…
(Various brands) Various This guide will show you where to find the internal fuse box of the MAN TGX, following the instructions below. Get into the cabin on the passenger si…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the washer pump fuse located? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What to do when your car air conditioning fuse is blown? Read answer
    • Vari - Where is the fuse of a RV refrigerator located? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer
    • Vari - Where is the tailgate fuse located? Read answer
    • Vari - Where is the battery alternator fuse located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos