Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to remove the antenna from a Dacia car

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Antenna
Operation: How to remove the antenna from a Dacia car

In this video we can see how easy it is to remove the antenna from a Dacia car. After removing the actual antenna, which is simply unscrewed, we need to remove the base from the bodywork. The beauty of this brand is the extreme simplicity that characterizes every operation we can perform on the car: so just open the rear hatch and with a key, unscrew the block that we can find inside the bodywork. Once the lock nut is removed, simply remove the fin from the outside and pull away all the electrical wire that is located in the gap between the roof and the interior ceiling. Operation completed.


Posted on 2 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - Why doesn't the car antenna unscrew? Read Answer
    • Vari - How do you unscrew the car antenna? Read Answer
    • Vari - How to replace the car antenna? Read Answer
    • Vari - What does the battery light indicate? Read Answer
    • Vari - Where to place the car radio gps antenna? Read Answer
    • Vari - What are the opening hours of the Genova Sampierdarena blue point? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos