Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Fan

Model: (Various brands) Various
Part: Accessory kit

Video tutorial

First, locate where you need to perform the operations. The motor to be replaced is positioned behind the glove compartment in front of the front passenger seat.

Use a lever to remove the lower cover, and you will immediately see the motor once you remove the panel. Now, remove the screws securing it and disconnect the plugs.

Now, simply extract the motor to identify the problem or directly replace the part. For reassembly, just retrace the steps in reverse.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

(Various brands) Various In this video tutorial, you will learn how to test the cabin heater fan of a generic car. Heating issues are not always caused by the fan: therefore,…
(Various brands) Various .. In this video, you will see how to replace the cabin fan, which is usually located on the passenger side. In this case, it is even.. …
(Various brands) Various This video explains how to resolve the issue of a noisy cabin fan. It specifically discusses an Alfa Romeo Mito, but the advice applies to all makes.…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos