Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Windscreen Wiper Water Pump

Model: (Various brands) Various
Part: Pump

Video tutorial

First, release the bonnet from the appropriate lever and lift it. This allows you to locate the reservoir for the windscreen washer fluid; the pump is located inside it. Disconnect the connector on the edge of the reservoir. Now disconnect any hoses attached to it. If the pump is external, pull it upwards to remove it, and clean the opening from where the pump draws water from the reservoir.

Then reconnect the various hoses and connectors. Reverse the steps described for reassembling the various components.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

(Various brands) Various It is common to fill the windscreen washer reservoir with just water, which is a mistake for several reasons: - Water does not provide adequate clean…
(Various brands) Various Is the windscreen washer not working as it should? Let's look at removing the pump and its associated parts. Lift the car with a jack and remove the …
(Various brands) Various Remove the windscreen wiper blades from your car. Start by lifting the wiper arm away from the windscreen. Grasp the wiper blade (to be replaced) wit…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos