Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the clips from the door panel

Model: (Various brands) Various
Part: Car door

In this video, we can see the problem of clips that have not detached from the side panel of the door: one solution could be to remove them with pliers, but it could be easy to break them and reordering them as a replacement could be very expensive. The youtuber suggests removing them with a slightly thick string or wire. Using a small screwdriver or a thin plastic spatula (recommended tool because it will not scratch the bodywork), we lift one side of the clip and then pass the wire inside, cross it underneath and pull it from the sides, pulling simultaneously towards us. This way the clip will come out without breaking and we will not tire ourselves too much.

Posted on 19 June 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Do you want to replace the speaker inside the door panel? Let's look at removing the door panel on a T5 to access the speaker. Remove the cover of th…
(Various brands) Various Today we will explain how to replace the eco-leather lining of the front door panel of a car. First, we remove the damaged cover and if necessary, we…
(Various brands) Various In this video we see how to remove the rivet clips from the trunk panel using a flathead screwdriver. We need to insert it into the round hole until …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos