Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Sharan
    4. : Instrument cluster

Volkswagen Sharan - Instrument cluster

Volkswagen Sharan (2010-2023 / MK 2, 7N)
How to reset the AdBlue warning light on the Volkswagen Sharan.
If we have noticed that the AdBlue warning light on the dashboard of our car has come on and the onboard computer indicates the remaining mileage, in the …read all…
Posted on 22 April 2023 by ScegliAuto
Volkswagen Sharan (2010-2023 / MK 2, 7N)
How to reset the service on Volkswagen Sharan?
After performing an oil change on this car model, it will be necessary to reset the service light that has come on in the dashboard. In the description below, …read all…
Posted on 1 April 2023 by ScegliAuto
Volkswagen Sharan (2010-2023 / MK 2, 7N)
How to reset the Volkswagen Sharan service light
If you want to manually remove the service warning light from the instrument panel of your Volkswagen Sharan Mk2, just read the following steps carefully and …read all…
Posted on 19 May 2023 by ScegliAuto
Shock absorbers (1) Air conditioning (1) Car stereo (2) Battery (1) Arm (1) Soft top (1) Key (1) Locking the trunk (1) Timing belt (2) -board computer (2) Checks and maintenance (27) Headlight (3) Air filter (5) Cabin air filter (5) Petrol filter (1) Diesel filter (2) Hand brake (1) Grille (1) Light bulb (1) Headlight bulb (2) Rear light bulb (2) License plate light (1) Engine (1) Starter motor (1) Engine oil (4) Door panel (7) Windshield (1) Rear bumper (1) Brake pads (1) Tires (2) Door (1) Push button (1) Instrument cluster (3) Wheel (2) Fuse box (12) Seat (4) Outside rearview mirror (1) Windscreen wipers (1) Transmission (2)

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos