Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Engine Oil Pressure Sensor Located in a Volkswagen Passat CC?

Model: Volkswagen Passat Cc MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Checks and maintenance

Video tutorial

In this video, see where the engine oil pressure sensor is located in the Volkswagen Passat CC and how to proceed if you need to replace it, a very simple and quick operation. As shown, the sensor is located on the right side of the engine, just behind the alternator.

To replace it, first ensure the engine is cool enough, then disconnect the indicated connector, grasp it with a 24mm socket, and unscrew it completely. Finally, tighten the replacement, reconnect the connector, and check the oil level, which may need topping up.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

Location of the Radio Fuses in the VW Passat CC
Location of the Radio Fuses in the VW Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) The Volkswagen Passat CC has three fuse boxes. The first box is located on the left side of the dashboard. The second box is found in the engine comp…
How to Reset the Tyre Pressure Warning Light on the Volkswagen Passat CC
How to Reset the Tyre Pressure Warning Light on the Volkswagen Passat CC
Volkswagen Passat Cc (2008-2018 / MK 1) Today's main instructions will show you how to reset the tyre pressure warning light (TPMS) on the Volkswagen Passat CC; before performing the reset,…
How to Remove the Oil Change Warning Light on the Volkswagen Passat CC?
How to Remove the Oil Change Warning Light on the Volkswagen Passat CC?
Volkswagen Passat Cc (2008-2018 / MK 1) As you can see in this tutorial, removing the oil change warning light from the dashboard of the Volkswagen Passat CC is a very simple and quick oper…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos