Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Lights on a Volkswagen New Beetle?

Model: Volkswagen New Beetle 9C, MK 2 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Tail light

See other generations:
Video tutorial

In this tutorial, see how to remove the rear lights on a Volkswagen New Beetle, an extremely simple and quick operation. First, ensure that the key is not inserted, then open the boot and remove the panel located at the back of the light in question.

Next, unscrew the indicated plastic nut, lever around the perimeter of the light with a spatula, and separate it from the bodywork. At this point, disconnect the power connectors, transfer the bulbs to the replacement if necessary, and refit it by following the reverse procedure.


Updated on 27 October 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats from the Volkswagen New Beetle
How to Remove the Rear Seats from the Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Briefly, here are the instructions to remove the rear seats from the Volkswagen New Beetle. First, open the boot lid and start unscrewing the fasteni…
How to remove the rear lights on a Volkswagen New Beetle
How to remove the rear lights on a Volkswagen New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) To remove the rear lights of a 1999 Volkswagen New Beetle, you can follow these steps. Open the rear hatch to access the lights. Remove the interior …
Replacing Bumper on New Beetle
Replacing Bumper on New Beetle
Volkswagen New Beetle (1999-2012 / 9C, MK 2) Need to remove the rear bumper of the Volkswagen New Beetle if damaged? Here's how to do it from the front of the car. Lift the bonnet and secure it.…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos