Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volkswagen Caddy?

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Inside the cabin of the Volkswagen Caddy, you can reset the Service light: press and hold the button located at the bottom right of the instrument panel, labelled "0.0/SET". While holding this button, turn on the ignition by turning the key. After the ignition is on, you can release the button at the bottom right of the speedometer and press the button at the bottom left once, allowing the Service light to turn off permanently.

To confirm the reset of the light, you will need to switch off and then turn on the ignition again.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Volkswagen Caddy?
How to reset the Service light on the Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) To reset the Service light on the Volkswagen Caddy, turn on the ignition by pressing the appropriate ignition button. Once the ignition is on, press …
How to Reset the Service Light on the Volkswagen Caddy?
How to Reset the Service Light on the Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) From the instrument cluster of the Volkswagen Caddy, you can clear the Service light by turning on the ignition and pressing the appropriate power bu…
How to Reset the "Service" Light on a Volkswagen Caddy?
How to Reset the "Service" Light on a Volkswagen Caddy?
Volkswagen Caddy (2020-2026 / SB) Good morning, today we will focus on resetting the "Service" light on our Volkswagen Caddy. Before proceeding, it is necessary to carry out the servi…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos