Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear light bulb of a Volkswagen Golf?

Model: Volkswagen Golf Golf 6, MK 6, 5K1, Golf VI - Years: 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

Before starting, open the rear tailgate of your Volkswagen Golf. Begin by unscrewing and removing the screws that secure the rear light to its housing. Next, pull out the light and disconnect the electrical connector to access the bulb holder.

Proceed by unclipping the clips that hold the bulb holder to the light. At this point, you can remove the damaged bulb and successfully complete the disassembly.

To fit the new bulb in your Volkswagen Golf, simply follow these steps in reverse, and you will have completed the replacement.


Updated on 2 November 2026 by ScegliAuto


Related tutorials

How to replace the rear headlight bulb of the Volkswagen Golf 6
How to replace the rear headlight bulb of the Volkswagen Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this new mini guide aimed at all of you who own a Volkswagen Golf Mk6, we will describe all the steps you need to follow if you want to replace th…
How to Change the Brake Light Bulb on a Volkswagen Golf 6?
How to Change the Brake Light Bulb on a Volkswagen Golf 6?
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) The brake light bulbs on the Volkswagen Golf 6 are installed in the rear tailgate. When one of them blows, to replace it, you need to open the boot a…
How to Replace the Rear Light Bulb on a VW Golf 6
How to Replace the Rear Light Bulb on a VW Golf 6
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Replacing the rear light bulb on a Volkswagen Golf 6 is a very simple task. The first step is to open the boot. The second step is to remove the side…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos