Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the exhaust of the Volkswagen Golf 1.9 TDI

Model: Volkswagen Golf Golf IV, MK 4, Golf 4 - Years 1997-2003
Part: Exhaust muffler

Today's steps will show us how to dismantle and replace the exhaust of the Volkswagen Golf. First, lift the vehicle and start unscrewing the nuts of the exhaust manifold studs, disconnecting them from the engine block; then unscrew the bolts of the manifold brackets and the catalytic converter, until it is completely removed, as shown in the video. At this point, replace and install the new exhaust, first installing the manifold and then mounting the catalytic converter and the muffler, following the video tutorial until the end for the complete installation.

Posted on 8 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the clutch of the Volkswagen Golf 1.9 TDI
Replacement of the clutch of the Volkswagen Golf 1.9 TDI
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) The information provided in this guide will show us the disassembly and replacement process of the clutch kit for the Volkswagen Golf 1.9 TDI. First,…
How to Remove the EGR Valve on a Volkswagen Golf 6 1.6 TDi?
How to Remove the EGR Valve on a Volkswagen Golf 6 1.6 TDi?
Volkswagen Golf (2008-2012 / MK 6, Golf VI, Golf 6, 5K1) To remove the EGR valve on a Volkswagen Golf 6 1.6 TDi, open the bonnet to access the components inside the engine compartment. Once opened, locate t…
Replacement of the timing belt of the Volkswagen Golf 1.6 TDI
Replacement of the timing belt of the Volkswagen Golf 1.6 TDI
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) The instructions in this guide will show us the procedure for disassembling and replacing the timing belt of the Volkswagen Golf 1.6 TDI. First, we l…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos