Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on a Volkswagen Polo

Model: Volkswagen Polo 6R, MK V, Polo 5, Polo V, MK 5 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

Today's steps will show you how to reset the tyre pressure monitoring system (TPMS) warning light on a Volkswagen Polo. Before resetting, ensure all four tyres are at the correct operating pressure. Get into the vehicle and turn the ignition key to position one. Then, press and hold the 'set' button found on the dashboard until the TPMS light on the instrument panel resets, as shown in the video.

Turn off the ignition and finally start the engine!


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure warning light on the Volkswagen Polo?
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) To reset the tyre pressure warning light on the Volkswagen Polo, inflate the tyres until they reach the recommended pressure value: this value is fou…
How to Reset the Tyre Pressure Warning Light on a Volkswagen Polo?
How to Reset the Tyre Pressure Warning Light on a Volkswagen Polo?
Volkswagen Polo (2009-2017 / 6R, MK V, Polo 5, Polo V, MK 5) To reset the tyre pressure warning light on your Volkswagen Polo, start by turning on the car without starting the engine. Then, use the buttons on t…
Reset of the tire pressure monitoring system (TPMS) warning light for the Volkswagen Polo.
Reset of the tire pressure monitoring system (TPMS) warning light for the Volkswagen Polo.
Volkswagen Polo (2017-2025 / MK 6, Polo 6, AW1, MK VI, Polo VI) Today's guide will show us the procedure to reset the tire pressure warning light on the Volkswagen Polo. Before performing the reset of the TPMS sen…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2017-2025 - How do you reset the Volkswagen Polo tire pressure warning light? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos