Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the armrest in the Volkswagen Golf?

Model: Volkswagen Golf Golf VII, MK 7, Golf 7 - Years 2012-2019
Part: Checks and maintenance

In this tutorial we can see how to disassemble the armrest in the Volkswagen Golf, an extremely simple and quick operation. First of all, go inside the cabin, then lift the armrest and, possibly using a plastic spatula, unhook the lower panel by levering it. Then locate the two indicated fixing screws, unscrew them using a simple cross-tip screwdriver and remove the armrest from the support. At this point, all that remains is to insert the replacement part, and reassemble everything following the reverse procedure.

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Today we will discover the main instructions that will allow us to disassemble and replace the central armrest of the Volkswagen Golf. First, we get …
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) Here’s how to remove the armrest located above the centre tunnel of a Volkswagen Golf Mk7. Move the leather armrest forward, then remove the air vent…
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Learn how to remove and replace the armrest compartment located above the central tunnel of a Volkswagen Golf. Position the armrest vertically; remov…

    Frequently Asked Questions

    • Golf 2012-2019 - Why does the rear hatch of the Volkswagen Golf not open? Read answer
    • Golf 2008-2012 - How often should the Volkswagen Golf 6 be serviced? Read answer
    • Golf 2012-2019 - How many km are the coupons for the Volkswagen Golf? Read answer
    • Golf 1997-2003 - Why does the Volkswagen Golf 4 temperature gauge not work? Read answer
    • Golf 2003-2008 - Where is the fuel pump relay on my Golf 5 located? Read answer

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos