Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the license plate light bulbs in the Volkswagen Golf?

Model: Volkswagen Golf MK 6, Golf VI, Golf 6, 5K1 - Years 2008-2012
Part: License plate light

In this tutorial, we can see how to replace the license plate light bulbs in the Volkswagen Golf, a very simple and quick operation. First of all, make sure that the key is not inserted, then go to the back of the vehicle, locate the clip on the inner side of the light in question and, possibly using a flat-tip screwdriver, unlock it. Then remove the bulb holder from the housing, extract the old bulb, connect the replacement and reassemble everything following the reverse procedure. Repeat the operation on the opposite side, if necessary.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Number Plate Lights on Golf 4
Replacing Number Plate Lights on Golf 4
Volkswagen Golf (1997-2003 / Golf IV, MK 4, Golf 4) Are the number plate bulbs on your Volkswagen Golf 4 blown? Here’s how to change them. Use a screwdriver to remove the screws securing the light unit…
Replacing the Number Plate Lights on a Volkswagen Golf
Replacing the Number Plate Lights on a Volkswagen Golf
Volkswagen Golf (2012-2019 / Golf VII, MK 7, Golf 7) In today's tutorial, you will learn how to remove and replace the number plate bulbs on a Volkswagen Golf by following the instructions below. First,…
Replacing the Number Plate Lights of a Volkswagen Golf 5
Replacing the Number Plate Lights of a Volkswagen Golf 5
Volkswagen Golf (2003-2008 / MK 5, Golf 5, Golf V) How do you replace the number plate lights of a Volkswagen Golf 5? This video shows how to replace the damaged bulbs. Use a screwdriver or lever to r…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos