Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper on a Volkswagen Caddy Life Van?

Model: Volkswagen Caddy 2K, MK 3 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Front bumper

See other generations:
Video tutorial

This tutorial shows how to remove the front bumper on a Volkswagen Caddy Life van, a straightforward and quick operation. First, open the bonnet.

Then, unscrew the two bolts located at the sides of the grille, and using a long screwdriver, release the clips accessible through the holes. Next, unscrew all the screws and bolts located both inside the wheel arches and underneath the bumper.

Grab the bumper from one end and detach it from the frame by pulling it outward. To fit a replacement, simply follow the reverse procedure.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to Reset the Service on the Volkswagen Caddy Van?
How to Reset the Service on the Volkswagen Caddy Van?
Volkswagen Caddy (2020-2026 / SB) In this tutorial, you can see how to reset the service on the Volkswagen Caddy van, an extremely simple and quick operation, to be performed only aft…
How to reset the service light on a Volkswagen Caddy van?
How to reset the service light on a Volkswagen Caddy van?
Volkswagen Caddy (2020-2026 / SB) Resetting the service light on a Volkswagen Caddy van, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensu…
How to Replace the Auxiliary Belt on a Volkswagen Caddy Van?
How to Replace the Auxiliary Belt on a Volkswagen Caddy Van?
Volkswagen Caddy (2003-2020 / 2K, MK 3) In this tutorial, you will see how to replace the auxiliary belt on a Volkswagen Caddy van. This is a simple task but requires good manual skills. Fi…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos