Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. Caddy
    4. : How to replace the serpentine belt in a Volkswagen Caddy van?

Volkswagen Caddy - Video tutorial

Model: Volkswagen Caddy MK 3, 2K - Years 2003-2020
Part: V-belt
Operation: How to replace the serpentine belt in a Volkswagen Caddy van?

In this tutorial we can see how to replace the serpentine belt in the Volkswagen Caddy van, a simple operation but requiring good manual skills. First of all, we lift the front right side, taking the necessary safety measures, then we remove both the wheel and the inner cover of the wheel arch. We then cut the old belt, attach it to the alternator, and, using both the appropriate tool provided with the replacement and a socket wrench, we secure it to the pulley by turning it clockwise. At this point, all that remains is to reassemble everything following the reverse procedure.


Posted on 17 May 2024 by ScegliAuto



How to change the timing belt of the Volkswagen Caddy 2.0 TDI
Volkswagen Caddy (2003-2020 / MK 3, 2K) In this guide we will see the main steps to be able to remove and replace the timing belt of the Volkswagen Caddy 2.0 TDI, from 2017. First we open t
How to reset the service in the Volkswagen Caddy van?
Volkswagen Caddy (2020-2024 / SB) Resetting the service on the Volkswagen Caddy van, as we can see in this tutorial, is an extremely simple and fast operation. Before proceeding, it w
How to reset the tire indicator light in the Volkswagen Caddy van?
Volkswagen Caddy (2020-2024 / SB) In this tutorial, we can see how to reset the tire indicator in the Volkswagen Caddy van, an extremely simple and quick operation. Before doing this,

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos