Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light on a Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

To reset the tyre warning light on a Volkswagen Jetta, access the glove compartment and look for the reset button. Once located, start the car and ensure the tyre warning light is illuminated on the dashboard.

Press and hold the reset button for a few seconds until the light turns off. Release the button and check that the tyre warning light has turned off correctly. You may need to drive for a few miles for the system to properly register the tyre pressures.

Ensure you manually check the tyre pressures to confirm they are inflated to the correct pressure.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to reset the tyre pressure light on a Volkswagen Jetta?
How to reset the tyre pressure light on a Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To reset the tyre pressure light on a Volkswagen Jetta, start by checking the pressure of all tyres and ensure they are inflated correctly according …
How to reset the tyre warning light on the 2019 Volkswagen Jetta
How to reset the tyre warning light on the 2019 Volkswagen Jetta
Volkswagen Jetta (2018-2025 / A7, MK 7) To correctly complete the manual reset of the tyre warning light on the dashboard display of your 2019 Volkswagen Jetta, follow the procedure describ…
How to reset the tyre pressure warning light on the Volkswagen Jetta?
How to reset the tyre pressure warning light on the Volkswagen Jetta?
Volkswagen Jetta (2010-2018 / MK 6, A6) To reset the tyre pressure warning light on the Volkswagen Jetta, first turn on the ignition by turning the key in the ignition switch. Once the dash…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos