Do it yourself
Frequently asked questions about cars and motorcycles
Video tutorial

Today, we will discover the instructions that will allow you to access the external fuse box and find the fuse diagram for the Volkswagen Golf Plus. First, open the bonnet of the vehicle and begin removing the plastic cover located at the top right of the engine bay, next to the battery; this will allow access to the fuses, as shown in the video.

At this point, use the fuse diagram present in the vehicle's user and maintenance manual to identify all the codes and amperages of the fuses!


Updated on 7 November 2026 by ScegliAuto


Related tutorials

Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today, we will look at the diagram and positioning of the external fuses on a Volkswagen Golf, following the instructions below. First, open the vehi…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Today, we will discover the instructions regarding the diagram and location of the external fuse box for the Volkswagen Golf. First, open the bonnet …
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) In this guide, we will look at the location and diagram of the fuse boxes for the Volkswagen Golf. First, open the vehicle's bonnet and remove the pl…

Other guides you may be interested in

    Frequently Asked Questions

    • Golf 2008-2012 - Where is the Volkswagen Golf 6 reverse light fuse located? Read answer
    • Golf 2003-2008 - Where is the Volkswagen Golf windshield washer pump fuse located? Read answer
    • Golf 2003-2008 - Where is the airbag fuse located in the Volkswagen Golf? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos