Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to dismantle the roof lining of the Volkswagen Golf

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to disassemble the headliner or the inner roof lining of the Volkswagen Golf. First of all, we get on board the car and start removing all the components fixed on the headliner, as well as the sun visors, grab handles, and interior lights (unscrewing the screws and disconnecting the various electrical connectors), as shown in the video.

At this point, we also remove the plastic side pillars; we lever on the sides of the headliner (starting from the back) to detach it and remove it, replacing it with the new one!


Posted on 22 December 2024 by ScegliAuto


Related tutorials

How to remove the headliner of the Volkswagen Golf
How to remove the headliner of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today we will see the instructions that will allow us to disassemble and eventually replace the ceiling or the internal lining of the roof of the Vol…
Removal of the Headlining of the Volkswagen Golf
Removal of the Headlining of the Volkswagen Golf
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) Below are step-by-step instructions on how to remove and replace the headlining of the Volkswagen Golf. First, get inside the vehicle and start remov…
How to disassemble the panoramic roof of the Volkswagen Golf
How to disassemble the panoramic roof of the Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today we will discover the instructions that will allow us to disassemble and replace the panoramic roof of the Volkswagen Golf. First, we get on boa…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos