Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal of the Headlining of the Volkswagen Golf

Model: Volkswagen Golf MK 7, Golf 7, Golf VII - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

Below are step-by-step instructions on how to remove and replace the headlining of the Volkswagen Golf. First, get inside the vehicle and start removing all the elements fixed to the headlining, including the interior light fixture (also disconnecting the electrical connectors), grab handles, and sun visors; then remove the plastic side pillars as shown in the video.

At this point, open the boot to remove the headlining of the vehicle, carrying out the repair or replacing it with a new one.


Posted on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Headlining in a Volkswagen Golf?
How to Replace the Headlining in a Volkswagen Golf?
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) To replace the headlining in a Volkswagen Golf, you need to remove all components that obstruct the removal of the interior roof lining: you will nee…
How to dismantle the roof lining of the Volkswagen Golf
How to dismantle the roof lining of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) In this guide, we will see the instructions that will allow us to disassemble the headliner or the inner roof lining of the Volkswagen Golf. First of…
How to remove the headliner of the Volkswagen Golf
How to remove the headliner of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today we will see the instructions that will allow us to disassemble and eventually replace the ceiling or the internal lining of the roof of the Vol…

    Frequently Asked Questions

    • Golf 2008-2012 - How do you use the emergency boot release on a Volkswagen Golf 6? Read answer

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos