Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the tire pressure light in the Volkswagen Jetta?

Model: Volkswagen Jetta MK 6, A6 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

Resetting the tire pressure light in the Volkswagen Jetta, as we can see in this tutorial, is an extremely simple and quick operation. Before doing this, we must have restored the correct pressure of each tire following the instructions in the manual.

We start by going inside the cabin, then we insert the key and turn on the instrument panel. We then open the passenger's glove compartment, locate the button depicting the light in question, and hold it down for the necessary time for the light itself to disappear from the panel.

Finally, we restart the vehicle.


Posted on 29 December 2024 by ScegliAuto


Related tutorials

Volkswagen Jetta (2010-2018 / MK 6, A6) You can completely clear the tyre pressure warning light on a Volkswagen Jetta by inflating the tyres until they reach the optimal pressure value: th…
Volkswagen Jetta (2010-2018 / MK 6, A6) .. In this tutorial, we can see how to reset the tire pressure light in the Volkswagen Jetta, an extremely simple and quick operation,.. …
Volkswagen Jetta (2010-2018 / MK 6, A6) .. In this tutorial, we can see how to reset the tire pressure light in the Volkswagen Jetta, an extremely simple and quick operation,.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos