Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the outer panel of the rear door in the Volkswagen Golf?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the external panel of the rear door in the Volkswagen Golf, to be done for example in case we need to replace the lock. First of all, we open the door we will be working on, then we remove the vertical plastic trim, locate the indicated hole and, with a Torx T20 key, loosen the bolt being careful not to let it fall.

We then extract the lock cylinder, remove the handle and continue by unscrewing all the various bolts indicated. At this point, all that's left is to separate the panel from the door.


Posted on 3 March 2025 by ScegliAuto


Related tutorials

How to Replace the External Wing Mirror on a Volkswagen Golf
How to Replace the External Wing Mirror on a Volkswagen Golf
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Today's main steps will guide you through the process of removing and replacing the external wing mirror on a Volkswagen Golf. First, open the front …
How to Replace the External Wing Mirror on a Volkswagen Golf
How to Replace the External Wing Mirror on a Volkswagen Golf
Volkswagen Golf (1997-2003 / Golf IV, Golf 4, MK 4) Today’s information will show you how to remove and replace the external wing mirror on a Volkswagen Golf. First, open the front door and begin to re…
How to Remove the Tailgate Panel of the Volkswagen Golf
How to Remove the Tailgate Panel of the Volkswagen Golf
Volkswagen Golf (2003-2008 / Golf 5, MK 5, Golf V) Today, follow these instructions to remove and replace the tailgate panel of the Volkswagen Golf, allowing you to subsequently remove the boot lock. …

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos