Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the "Service" indicator on a Volkswagen Sharan?

Model: Volkswagen Sharan 7N, MK 2 - Years 2010-2023
Part: Service warning light

To reset the "Service" light on a Volkswagen Sharan, start by turning on the instrument panel without starting the engine. Use the button located under the instrument panel to access the service menu. This button is typically used to navigate within the vehicle's system. Press it multiple times to scroll through the options until you find the section related to maintenance or service intervals. Once inside the correct section, hold down the button for a few seconds until the reset option for the "Service" light is displayed. The system will ask you to confirm the reset, and at that point you will need to keep the button pressed until the reset is completed. The "Service" light will turn off, indicating that the vehicle has recorded the new scheduled maintenance interval. After performing the reset, it is always a good practice to turn off and on the instrument panel to verify that the light has been successfully deactivated. If the light continues to stay on, carefully repeat the procedure, making sure to follow each step correctly.

Posted on 28 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volkswagen Sharan?
How to Reset the Service Light on a Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) To reset the Service light on a Volkswagen Sharan, press and hold the 0.0/SET button located on the right side of the instrument cluster. Once the ig…
How to Reset the Service Light on a Volkswagen Sharan
How to Reset the Service Light on a Volkswagen Sharan
Volkswagen Sharan (2010-2023 / 7N, MK 2) You can completely clear the Service light displayed on the dashboard of the Volkswagen Sharan by holding down the 0.0/SET button located on the righ…
How to Reset the Service Light on a Volkswagen Sharan?
How to Reset the Service Light on a Volkswagen Sharan?
Volkswagen Sharan (2010-2023 / 7N, MK 2) To reset the Service light on a Volkswagen Sharan, press and hold the 0.0/SET button located on the right side of the instrument cluster. Once the cl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos