Do it yourself
Frequently asked questions about cars and motorcycles

How to change the battery of a Volkswagen Golf key?

Model: Volkswagen Golf Golf 5, MK 5, Golf V - Years: 2003, 2004, 2005, 2006, 2007, 2008
Part: Key

See other generations:
Video tutorial

To change the battery of a Volkswagen Golf key, start by manually extracting the key blade. On the Golf key, you will notice a small button or tab that, when pressed, will allow you to remove the physical key. After doing so, carefully observe the key shell.

At the bottom, near where the blade was located, there is a slot. Using a small flathead screwdriver or a similar tool, gently insert it into that slot to separate the two parts of the key. Once opened, you will see the lithium battery inside the shell.

Carefully remove the old battery, being careful not to damage the contacts. Replace it with a new battery of the appropriate type, usually a CR2032. Make sure to position it correctly, with the positive side facing upwards.

At this point, close the key shell, applying light pressure until you hear a click. Reinsert the key blade and check the proper functioning of the buttons.


Posted on 7 May 2025 by ScegliAuto


Related tutorials

Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) How do you change the remote key battery on your Volkswagen Golf 7? Let's see how to do it in this video. Take your remote key and press the button t…
Volkswagen Golf (2012-2019 / MK 7, Golf 7, Golf VII) This video tutorial shows the procedure for changing the battery in the key of the Volkswagen Golf 7. The battery to be inserted into the key is a CR…
Volkswagen Golf (2008-2012 / Golf 6, MK 6, 5K1, Golf VI) Although the video author focuses specifically on the key fob of the Volkswagen Golf 6, the same procedure applies to all key fobs with similar chara…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos