Do it yourself
Frequently asked questions about cars and motorcycles

How do you remove the central console of the Volkswagen Polo 5?

Model: Volkswagen Polo Polo 5, Polo V, MK 5, MK V, 6R - Years 2009-2017
Part: Checks and maintenance

Reaching the removal of the central console of the Volkswagen Polo 5 definitely depends on maintenance work to be done, or the need to clean the materials with which it is composed, and so on. Let's proceed by observing the protagonist of the tutorial: Without any tools to use, only using hands, the gear lever boot is removed first, then the rear compartment of the central tunnel, the plastic mask of the air conditioning controls, the frame of the central display, and the entire aforementioned tunnel. All these components are interlocked, that's why simply applying pressure on the locking fins with hands is enough to disassemble them.

Posted on 26 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Volkswagen Polo (2017-2025 / Polo VI, Polo 6, MK 6, AW1, MK VI) Remove the rear plastics of the centre tunnel. Then, use a socket spanner to undo the securing pins of the metal bar. Next, insert the armrest into t…
Volkswagen Polo (2001-2009 / MK IV, Polo IV, Polo 4, MK 4, 9N) The video tutorial presented here was shot on a Volkswagen Group car, not the Volkswagen Polo 9n, but since the type of work is common among the diff…
Volkswagen Polo (2009-2017 / Polo 5, Polo V, MK 5, MK V, 6R) It will be possible to replace the timing belt of the Volkswagen Polo 1.2 TSi by lifting the car with a jack or a bridge so that it is possible to lo…

Other guides you may be interested in

    Frequently Asked Questions

    • Polo 2009-2017 - Where are the fuses located in the Volkswagen Polo? Read answer
    • Polo 2017-2025 - Message "Leave the vehicle only in position P" in the Volkswagen Polo, what does it mean? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos