|
Do it yourself
| |||
| ||||
How to deactivate the seat belt warning on a Volkswagen Golf MK5
Model: Volkswagen Golf
MK 5, Golf 5, Golf V
- Years 2003-2008
If we believe that we do not need our car to remind us to wear the seatbelt because we do it on our own initiative, we can consider removing the annoying buzzer that reminds us, especially if we have loaded a lot of weight on the passenger seat and the sensor interprets it as a person. There are two ways to do this: through the EOBD port on the onboard computer, or by disconnecting the sensor located under the seat, which is what we will do in the video: we pull the seat as far back as possible, and we will find a plastic cover, which we will remove and inside a compartment we will find two electrical connectors. The black one is the sensor we are interested in, while the yellow one is the airbag sensor; so we remove the black connector, put the cap back on, and the operation is complete.
Posted on 18 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
Disabling the seat belt buzzer on a Volkswagen Golf 5 is a very simple operation, which can be done independently. Many people prefer to disable the …
Volkswagen Golf
(2008-2012 /
MK 6, Golf VI, Golf 6, 5K1)
Today's guide shows how to remove and replace the seatbelt on a Volkswagen Golf, following the instructions below. First, remove the side pillar to a…
Volkswagen Golf
(2003-2008 /
MK 5, Golf 5, Golf V)
The information in this guide will allow you to deactivate the alarm or anti-theft system of the Volkswagen Golf in simple steps. First, get inside t…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.090
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |