Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volkswagen
    3. :
  3. New Beetle
    4. : How to remove the door panel on Vw New beetle

Volkswagen New Beetle - Video tutorial

Model: Volkswagen New Beetle MK 2, 9C - Years 1999-2012
Part: Door panel
Operation: How to remove the door panel on Vw New beetle

We remove the right front door panel on Volkswagen New Beetle: disconnect the battery terminals in the engine compartment, with a screwdriver unscrew the screws located in the space of the upper lever of the door opening and the screws in the handle (after removing the piece in plastic). We remove the plastic covering near the lock, unscrew the screws left on the door panel and remove the clips fastening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door.


Posted on 30 October 2023 by ScegliAuto



How do you remove the door panel of the Volkswagen New Beetle?
Volkswagen New Beetle (1999-2012 / MK 2, 9C) In order to remove the door panel of the Volkswagen New Beetle, you need to pry it with an object so that you can completely detach the inner lining
How to remove the door panel on New Beetle
Volkswagen New Beetle (2011-2018 / MK 3) Let's remove the door panel of a Volkswagen New Beetle (passenger right side), let's see how to proceed. Before starting the disassembly work, let's
How to remove the New Beetle door panel
Volkswagen New Beetle (1999-2012 / MK 2, 9C) Let's see how to remove the door panel (right) on Volkswagen New Beetle. Before starting the disassembly work, let's disconnect the battery terminals

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos